Matrix PRASAR UCS - Page 555

546 Matrix PRASAR UCS System Manual
• Under Configuration, click Account Name.
• Enter the Names of the clients against the account codes you have assigned to them. Refer the paper with
the two-column table you created.
• Click Submit.
Now, include the feature Account Codes in the Class of Service of the extensions.
By default, Station Basic Feature Template Number 01 is assigned to all extensions of the system. Template 01
has the feature Account Codes in the default CoS Group (Number 01). So, all extensions of the system can use this
feature.
If Account Codes is to be allowed only to selected extensions, follow these steps:
1. Define a CoS group with 'Account Code' enabled.
2. Prepare a Station Basic Feature Template with this CoS group applicable in all the “Time Zones”.
3. Assign this new Template to the extensions to which Account Codes is to be allowed.
Refer the topics “Class of Service (COS)” and “Station Basic Feature Template” for detailed instructions.
If Forced Account Code is to be used, enable ‘Do not allow outgoing calls without Account Code' check box in
the “Station Advanced Feature Template” of the extensions and ‘Forced Account Code’ check box in the
“Trunk Feature Template” assigned to the trunks.