Matrix PRASAR UCS System Manual 545
• ‘Forced Account Code’ check box in the “Trunk Feature Template” applied on the trunks through which
calls using account codes are to be made.
Preparing Account Name List
In consultation with the Users, you may prepare the Account Name list. You may do the following
• Draw a two-column table on a paper.
• Write Account Codes on one column. Account codes may be any three-digit number between 001 and
999.
• Write the Account Names, that is, names of the clients on the second column, against their respective
Account Codes.
• The names must not exceed 12 characters. All ASCII characters except <, >, :, ", /, \, |, ?, * are allowed.
For example:
You need not follow a cardinal numbering sequence when assigning Account Codes.
You may assign any code to any client. For instance, you can assign code '111' to Midas Business
Solutions, '222' to Jet-Set Holidays, '333' to Bacchus Vineyard.
Configuring Account Codes using Jeeves
After preparing the Account Name list,
• Login as System Engineer.
Account Code Client Account Name
001 Midas Biz
002 Jet Set
:
010 Bacchus
To Next Page
Loading...