556 Matrix PRASAR UCS System Manual
• Under Reports, click Wakeup Alarm.
• The unserved Alarm calls will appear on your screen.
• You can cancel any of the unserved Alarm calls by selecting the check-box and clicking the Cancel
Selected Alarms.
• You can also print this page by clicking the Print.
• Click Close to exit the page.
• Click Submit.
How to use
Alarms can be set by the extension users by themselves. The extension users can also ask the Operator to set the
alarm for them
Alarms set/canceled by Operator
The Operator can set/cancel non-voice guided Alarms from System Administrator mode.
Operator using Extended IP Phone
Using DSS Key:
To set Alarm for the extension user,
• Press the key assigned the 'Remote Alarm' function.
• Enter the Extension Number.
• Enter Time in HH:MM
• Select 'Once Only' or 'Daily'.
• Press 'Enter' key.
• Select 'Personalized' or 'Automated'.
• Press 'Enter' key to set Alarm.
• You get a confirmation tone and a text message with the phone number for which the alarm is set.
To Next Page
Loading...