Matrix PRASAR UCS - Page 564

Matrix PRASAR UCS System Manual 555
• Routing Group: Selecting this option would connect the extension user to the stations programmed in
the Alarm Notification Group. The System Engineer may connect a device which can play customized
alarm greetings with date, time, weather conditions, traffic conditions, a marketing message, etc. on the
stations programmed in the Alarm Notification Group.
If Voice Mail Auto Attendant is selected as a Routing Group member, the system will place the call on the
Voice Mail System.
• Voice Mail: Selecting this option would connect the extension user to the Voice mail System.
9. Macros - This is a short code for simulating the Alarm call. When the DSS Key assigned to Alarm is
pressed the IP Phone send a fixed string to the system. The system interprets this string and translates it
into a string that can be understood by the system. For example, the IP Phone has a DSS key for Alarm
calls which sends the string '51' to the system. The system can be programmed to translate '51' into the
feature access code for Alarm calls, '*161'.
All the above listed parameters can be programmed using Jeeves.
Configuring Alarm Parameters using Jeeves
• Login as System Engineer.
• To configure Alarm parameters, go to “System Parameters”.
• To view the Alarm Report Status on your phone LCD, you must assign a DSS Key to Wakeup Call Log.
Refer the topic “DSS Keys Programming”, “DSS Key Settings” in “Configuring Matrix SPARSH VP330”,
“DSS Key Settings” in “Configuring Matrix SPARSH VP248”, “DSS Key Settings” in “Configuring Matrix
SPARSH VP310” and “DSS Key Settings” in “Configuring Matrix SPARSH VP510” for instructions.
• To select Alarm Notification Type for extensions, under Configuring Extensions, see“Station Advanced
Feature Template”.
• If you select Music-On-Hold as Alarm Notification type, no further configuration is required.
• If you select Voice Mail as the Alarm Notification Type, no further configuration is required.
• If you have selected Routing Group as Alarm Notification Type, you must create a Routing Group and
assign this Routing Group number in the Station Advanced Feature Template of the extensions. See
“Routing Group” and “Station Advanced Feature Template” for instructions on applying the template to
SIP Extensions and Virtual Extensions.
• To create macro and Assign the DSS key for IP Phones, see “Macros”.
Viewing and Printing Alarm Reports
The Operator can view the status of Alarms that are yet to be served from the System Administrator mode and if
required print them.
• Login as System Administrator.
• Click the Reports link.