570 Matrix PRASAR UCS System Manual
• Under Configuration, click Authority Code.
Against each Authority Code,
• Assign an Authority Password. The password can be a minimum of 4 digits and a maximum of upto 10
digits. Valid digits are 0 to 9, * and #. Default: 1111.
To avoid unauthorized access, we recommend you to change the password regularly. Make sure it is
strong and is kept confidential.
• Enter the Name of the user. The name acts as an identifier. Default: Blank.
• By default, Station Basic Feature Template number 41 and Station Advanced Feature Template
number 41 are assigned to all Authority codes.
If you want to change the calling permission, allow/deny features to users, you must customize the Class
of Service, Toll Control and other features/facilties in the Template according to your requirement.
You may set the 'Walk-Out Mode’ in as One Call or Multiple Calls in the Advanced Feature Template.
Refer to “Station Basic Feature Template” and “Station Advanced Feature Template” for detailed
instructions.
• Click Submit.
You can assign/change the Name and Password from the SA mode also. To do this,
• Login as System Administrator.
To Next Page
Loading...