Matrix PRASAR UCS - Page 597

588 Matrix PRASAR UCS System Manual
How to use
Auto Redial can be set/canceled from Extended IP Phone.
For Extended IP Phone Users
Using DSS Key
To set Auto Redial:
• When the external number you are trying is busy,
• On Busy tone, press the 'Redial' Key.
•Go Idle.
To cancel Auto Redial:
• Press the ‘Redial’ Key again.
Using Command:
To set Auto Redial:
• When the external number you are trying is busy,
• Go ON-Hook on Busy Tone.
•Dial 17.
• Go Idle or you get dial tone after 3 seconds.
To cancel Auto Redial:
• Pick up the handset.
•Dial 1070.
• Go Idle or you get dial tone after 3 seconds.