Matrix PRASAR UCS - Page 604

Matrix PRASAR UCS System Manual 595
Barge-In Timer
Barge-In Timer is the time after which the caller gets connected to the called party. By default the Timer is set to 10
seconds.
Changing Barge-In Timer using Jeeves
• Login as System Engineer.
• Under Configuration, click System Timers and Counts.
• Scroll to Other Features.
• Go to the parameter Barge-In Timer (sec).
• Set the desired value for the Timer.
• Click Submit.
How to use
For Extended IP Phone Users
• Dial an extension.
• If the extension is busy, you get Busy Tone.
• Press DSS Key assigned to 'Barge-In' function.
OR
•Dial 4
88
.
• You get Ring Back Tone.
• Wait for the system to connect you to the called extension.
•Talk.
• Replace the handset after the conversation has ended.
88. This default feature access code can be changed to suit your preference. Refer the topic “Access Codes”.