Matrix PRASAR UCS - Page 626

Matrix PRASAR UCS System Manual 617
• Area Code Table is configured as:
• The Normal Pulse Rate Table is configured as:
• With this configuration, PRASAR UCS will calculate the call cost as follows:
• An Outgoing Call is made by an extension user, to the number ‘2630555’ through the trunk, SIP
Trunk-1 at 20:10 hours. PRASAR UCS will check the Call Cost Calculation parameters assigned on
the trunk and determine the Time Zone as per time of the call.The system will also check the
corresponding Pulse Rate Option configured on the trunk.
In this example, Time Zone for SIP Trunk-1 at 20:10 Hours would be Time Zone 1, and the Pulse
Rate Option for SIP Trunk-1 is ‘1’.
• PRASAR UCS will match the dialed number ‘2630555’ in the Area Code table. A best match is
found with the entry configured at index 001 in the Area Code Table.
As per the Area Code Table, the Pulse Rate Type ‘03’ is programmed in ‘Pulse Rate Option 1’ for
the matching entry (at Index 001).
Index
Area
Code
Name
Ignore
Digit
Count
Pulse Rate Type for Pulse Rate
Option - 1 Option - 2 Option - 3 Option - 4
001 26 Local 03 06 09 10
002 09 SIP 05 03 07 08
Pulse Rate Type
Time Zone T1 Time Zone T2 Time Zone T3 Time Zone T4
First
Unit
Add.
Unit
First
Unit
Add.
Unit
First
Unit
Add.
Unit
First
Unit
Add.
Unit
01
Duration (sec) 180 180 60 30 90 30 120 60
Cost 002.00 002.00 002.00 002.00 002.00 002.00 002.00 002.00
02
Duration (sec) 300 300 300 300 300 300 300 300
Cost 001.00 001.00 001.00 001.00 001.00 001.00 001.00 001.00
03
Durations) 3030303030303030
Cost 001.00 001.00 001.00 001.00 001.00 001.00 001.00 001.00
04
Duration (sec)4545454545454545
Cost 001.00 001.00 001.00 001.00 001.00 001.00 001.00 001.00
05
Duration (sec) 180 180 180 180 180 180 180 180
Cost 003.00 003.00 003.00 003.00 003.00 003.00 003.00 003.00
:
Durations) ::::::::
Cost ::::::::
32
Duration (sec)
Cost