56 Matrix PRASAR UCS System Manual
8. It is a PoE enabled phone and can be powered over Ethernet by connecting it to a PoE enabled LAN
switch(IEEE802.3af complaint).
If you do not want to use PoE, plug in the connector of the adapter into the power jack(DC Jack) with the
label 5VDC-2A at the bottom of the phone. Plug in the power adapter into a power outlet
The IP phone should be used with Matrix original power adapter (5V/2A) only. The use of any third-party
power adapter may cause damage to the phone.
If both the power options, that is, PoE as well as Power Adapter are available to the phone, then the phone
will derive power from the PoE enabled LAN Switch.
9. Switch ON power supply.
When you power the phone, the boot process will be initiated in the following sequence.
• All keys with LED, including the Speaker key, and the Ringer LED, will glow.
• The LCD display will light up and the booting message appears.
• Then the ‘Loading...’ message appears on the phone display.
• The phone will start loading the Extended IP Phone Firmware.
It will display current firmware being loaded.
• After loading the firmware, the phone will prompt you to change Network settings.
• Wait for a few seconds.
If you want to change the Network Settings or Server Settings, press the Enter key. Detailed instructions
for changing the Network Settings of the phone are provided at the end of this topic. See “Network
Settings” at the end of this topic.
• The phone makes DHCP Discovery and fetches its IP Address and Server Address from the DHCP
Server.
On getting the IP Address and Server Address, the phone initiates Auto Configuration to download the
configuration files from PRASAR UCS.
• As the phone downloads the configuration files, the file names will appear one by one.
• On successful download of all configuration files, the phone attempts to register with PRASAR UCS.
• On successful registration, the phone will display the current day, date and time, the extension number and
name assigned to the Extended IP Phone.
To Next Page
Loading...