664 Matrix PRASAR UCS System Manual
• To forward calls of this extension to another extension, select Forward Calls to Phone and the type of
call forward. Default: Unconditionally.
Enter the extension number to which calls must be forwarded.
• To forward calls of this extension to an external number, select Forward Calls to External Number
and select the type of call forward. Default: Unconditionally.
Enter the external number to which calls must be forwarded.
By default, TAC 0 is assigned for routing external calls. You can change the TAC as per your
requirement.
• Click the Apply Call Forward button to set Call Forward -Scheduled.
The message “Call Forward is set” appears.
• Click the Dual Ring button to set Call Forward-Scheduled with Dual Ring.
The message “Dual ring is On” appears.
• To set call forward for Break Hours and Non-working Hours, follow the same instructions as above.
• To set Call Forward - Scheduled for another extension, follow the same instructions as above.
Setting Call Forward-Scheduled using a Telephone
• The destination number for forwarding calls can be a maximum of 16 digits. Terminate the command
with #* if destination number has fewer than 16 digits.
• If the destination number is an external number, enter the Trunk Access Code followed by the
destination number.
For Extended IP Phone Users
Call Forward-Scheduled by Extension Users
To set Call Forward-Scheduled:
• Press DSS key assigned to Call Forward-Scheduled.
OR
•Dial 1175.
• Scroll to the desired Time Zone.
• Press Enter key to select Time Zone.
• Scroll to the desired Call Forward type for the selected Time Zone.
• Press Enter key to select Call Forward type.
• Enter Destination Number on prompt.
• You get confirmation tone and message showing extension to which Call Forward is set.
To Next Page
Loading...