Matrix PRASAR UCS - Page 676

Matrix PRASAR UCS System Manual 667
• If you want to allow Call Forward-When Not Registered to be set only by the System Administrator (SA) for
the extension users, the System Engineer (SE) must disable ‘Call Forward’ feature in the Class of Service
(CoS) group in the Station Basic Feature Template applied to the SIP phones.
If you disable ‘Call Forward’ in the CoS of a SIP phone, the user will not be able to set any other type of
Call Forward.
Setting Call Forward-When Not Registered
Call Forward-When Not Registered can be set from
• the SA mode from Jeeves.
• the SIP phones connected as extensions.
Call Forward-When Not Registered set by SA
• Login as System Administrator.
• Click Extension.
•In Select Extension, enter the Number or the Name of the extension on which you want to set this feature.
•Click Submit.
• The searched extension user details appear on your screen.
• Click Call Forward When Not Registered to expand.
• Select the destination for forwarding calls when the SIP Extension fails to register from the following:
• Forward Calls to Voice Mail.
• Forward Calls to Extension Number. If you select this option, you must enter the desired
Extension Number in the corresponding box.