668 Matrix PRASAR UCS System Manual
• Forward Calls to External Number. If you select this option, you must enter the desired external
number in the corresponding box. Also, assign a trunk to route the call by selecting the Trunk
Access Code from the using TAC list.
• Click the Apply Call Forward button. The message “Call Forward is set” appears.
• To set time-zone based Call Forward - When Not Registered, click Call Forward When Not Registered-
Scheduled to expand.
• To set Call Forward When Not Registered for working hours, under Working Hours, select the desired
destination from the following options:
• Forward Calls to Voice Mail.
• Forward Calls to Extension Number. If you select this option, you must enter the desired
Extension Number in the corresponding box.
• Forward Calls to External Number. If you select this option, you must enter the desired number in
the corresponding box, and assign a trunk to route the call by selecting the Trunk Access Code in
the using TAC list.
• Click the Apply Call Forward button. The message “Call Forward is set” appears.
• To set call forward for Break Hours and Non-working Hours, follow the same instructions as above.
• To set Call Forward When Not Registered - Scheduled for another extension, follow the same
instructions as above.
Call Forward-When Not Registered set/canceled by SIP Phone Users
SIP extension users can set/cancel Call Forward-When Not Registered from their SIP phones. The SIP phone may
be a Matrix Extended IP Phone or any Standard SIP phone.
To Next Page
Loading...