688 Matrix PRASAR UCS System Manual
By default, Station Basic Feature Template Number 01 is assigned to all the extensions of PRASAR UCS. The
Station Basic Feature Template 01 is assigned COS group 01 which has Call Pick-Up feature enabled. Thus, all the
extensions of the system can use Call Pick-Up by default.
If you want to deny Call Pick-up feature to all extensions, you can simply disable Call Pick-Up in the default CoS
group 01.
However, if Call Pick-Up is to be denied on only selected extensions then:
1. Define a CoS group with Call Pick-Up disabled.
2. Prepare a Station Basic Feature Template with this CoS group applicable in all the “Time Zones”.
3. Assign this new Template to the extensions to which Call Pick-Up is to be denied.
Refer the topics “Class of Service (COS)” and “Station Basic Feature Template” for detailed instructions and
configuration.
How to use
For Extended IP Phone Users
To pick up a ringing extension in your Group:
• Press DSS Key assigned to Call Pick-Up Group.
OR
•Dial 4.
• Talk.
• Go idle.
To pick up any one of several ringing extensions ringing or the extension that is not in your group:
• Press DSS Key assigned to Call Pick-Up Selective.
OR
•Dial 12.
• Dial number of the Extension you want to pick up.
•Talk.
• Go idle.
To Next Page
Loading...