710 Matrix PRASAR UCS System Manual
• Select the Apply Call Taping check box to enable. For detailed instructions, see “Configuring Trunks”.
To configure the Call Taping parameters and Number Lists,
• Under Configuration, click Station Advanced Feature Template.
By default, Station Advanced Feature Template 01 is assigned to all extensions of the PRASAR UCS. If
you want to assign Call Taping facility to all extensions, then program the Call Taping related parameters
and Number Lists, in Template 01.
However, if only selected extensions are to be assigned this feature, then:
• Prepare a separate Station Advanced Feature Template.
• Set the Call Taping Parameters in this template.
• Apply this new template to desired extensions that are to be allowed this feature.
• Click the Call Taping to expand.
• If you want calls without CLI to be taped, select the Tape calls coming without CLI check box.
• To program the list of numbers of incoming calls, click the link Number List- Incoming Calls.
To Next Page
Loading...