Matrix PRASAR UCS System Manual 711
The Number List page will open.
• Click the default number list 9-10 link assigned to Call Taping, then click the 001-250 link of the default.
The Number Lists 9 and 10 will open.
• If the same incoming and outgoing numbers are to be programmed for all extensions, you may simply
program the default Number lists 09 and 10.
• If different incoming and outgoing numbers are to be programmed for different extensions, then
prepare different number lists.
• Enter the List of Incoming Numbers that the system should match in List No. 09.
• Enter the List of Outgoing Numbers that the system should match in List No. 10.
You can program as many as 999 numbers in each list. Each entry on these Lists is stored in a serial order
against a 'Location Index, starting from 001-999'. There are 250 Location Index on each page on your
screen. To go to the next set of Location Index, for instance, 251-500, click the link under 09-10.
• Click Submit.
• Follow the same steps to program a different Call Taping number list. But ensure that the different List
number you programmed is entered in the Station Advanced Feature Template applied to the extensions.
• If you want calls between extensions to be taped, click the Call Taping for Internal Calls check box.
• Click Submit.
• Now, apply the programmed template to the desired extensions to which you want to provide the Call
Taping facility. Refer the topic “Station Advanced Feature Template” for programming instructions.
To Next Page
Loading...