Matrix PRASAR UCS - Page 742

Matrix PRASAR UCS System Manual 733
The following features can be set/canceled on extensions from the SA mode, regardless of whether these
features are allowed or denied in the CoS assigned to the extensions:
• Call Forward
• DND
• Dynamic Lock and Timer
• Hotline
Basic Features
A set of features including Internal Call, Call Hold, Call Toggle, Call Transfer, Department Call, Operator Access,
Redial, and Call Mute defined as Basic Features and allowed in all CoS groups.
It is not possible to enable or disable selectively any of the features included in "Basic Features".
How to configure
The table below presents the CoS groups from 01 to 20 with the list of features supported on the extensions.
Default CoS Groups
Feature Name
Class of Service Group
01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20
Account Code 
SA Mode
SA Extension 
Auto Call Back-Busy 
Auto Call Back-No Reply 
Auto Redial 
Auto Redial Priority 
Barge-In 
Call Forward 
Call Park 
Call Pickup 
Change Room Clean Status 
Global Directory Programming
CLIR 
CLIR Override 
Conference 
Continued Dialing 
Conversation Recording 
Decrement Dynamic Lock Timer
for Internal Calls

DISA 
Do Not Disturb 
Do Not Disturb - Override
Dynamic Lock 
Forced Answer 
Forced Release 
Global Directory Part-1 
Global Directory Part-2 
Global Directory Part-3 
Hotline 