734 Matrix PRASAR UCS System Manual
CoS group number 01 is assigned for all Time Zones in the default Station Basic Feature Template 01
assigned to all extensions of the PRASAR UCS.
CoS group number 19 and 20 are assigned when the Hospitality Application of PRASAR UCS is used.
When this application is being used in CoS group number 20, the SA Mode will be enabled. See
PRASAR UCS Hospitality System Manual.
Creating CoS Groups
• Take a pen and a paper pad.
• Prepare a list of extensions.
• Read the list of features supported on the extensions (see above Table 'Default CoS Groups for
Features').
• Against each extension name on the list, write the features needed for each Time Zone. You will notice
that the features needed by many extensions are identical.
• List the common features to be allowed to and features to be denied to all extensions. Assign a CoS Group
Number to this list.
• Are there any other features, in addition to those on the common list, which you want to allow to selected
extensions?
Interrupt Request
Live Call Supervision
Message Wait (Set/Cancel)
Mini Bar Details
Paging
Privacy from Interrupt Request,
Barge-In and DND-Override
Privacy from Raid
Raid
Return Call to Original Caller
(RCOC)
Room Monitor
Selective Port Access
Trunk-Trunk Transfer
Basic Features
a
General MailBox
Dept. Group-Call Forward
Emergency Conference
Intercom
DSS Call Pickup-Station
DSS Call Pickup-Trunk
Closed User Group (CUG)
PIN Dialing
a.
Basic Features includes: Internal Call, Call Hold, Call Toggle, Call Transfer, Department Call, Oper-
ator Access, Redial, Mute.
Feature Name
Class of Service Group
01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20
To Next Page
Loading...