Matrix PRASAR UCS System Manual 753
3-Party Conference in Class of Service
By default, Station Basic Feature Template Number 01 is assigned to all the extensions of the PRASAR UCS. The
Station Basic Feature Template 01 is assigned CoS group 01 which has 'Conference' enabled. So, all the
extensions of the PRASAR UCS can make Conference calls.
If you want to deny 3-Party Conference to selected extensions, follow these steps:
• Define a CoS group with 'Conference' disabled.
• Prepare a Station Basic Feature Template with this CoS group applicable in all the “Time Zones”.
• Assign this new Template to the extensions to which Conference is to be denied.
Refer the topics “Class of Service (COS)” and “Station Basic Feature Template” for detailed instructions and
configuration.
The feature 'Conference' in the Class of Service also includes Dial-In and Multi-party Conference.
Extensions that are denied 'Conference' in their Class of Service will not be allowed any of these
conference type - 3-Party, Dial-In and Multi-party Conference.
How to use
For Extended IP Phone Users
• Speech with Party 1 on trunk/extension.
• Press ‘Conference’ Key. Party 1 put on Consultation Hold.
• Dial the number of Party 2.
If Party 2 is a trunk,
• Dial Trunk Access Code, to grab a trunk.
• You get Trunk dial tone.
• Dial telephone number of Party 2. You get ring back tone.
• Speech with Party 2.
• Press the 'Conference' Key.
• Three-way speech is established.
When the Conference is established, the Conference Key LED will glow continuously and you will get a
message “Conference” on your phone display.
To Next Page
Loading...