776 Matrix PRASAR UCS System Manual
• Under Configuration, click System Parameters.
•Go to Day/ Night Mode. Select the desired option:
• Set System in Day Mode (Working Hrs)
• Set System in Night Mode (Non-Working Hrs)
• Set System in Break Mode
• Operate System as per Timetable assignment (default).
• Select the Toggle Day/Night mode through ‘Set Day/Night Mode’ key check box to switch to Day Mode
(Working Hours) or Night Mode (Non-Working Hours) on pressing the DSS Key. Default: Disabled.
• Click Submit.
Setting Day/Night Mode from SA mode using Jeeves
• Login as System Administrator.
• Click Day/Night Mode.
• Select the desired option:
• Set System in Day Mode (Working Hours)
• Set System in Night Mode (Non-Working Hours)
• Set System in Break Mode
• Operate System as Per Timetable Assignment (default).
To Next Page
Loading...