Matrix PRASAR UCS - Page 804

Matrix PRASAR UCS System Manual 795
How to configure
For this feature to work, the following must be configured:
1. DSS Key: A direct station selection (DSS) key must be configured for the Dial by Name feature. Without
the DSS Key this feature will not be accessible.
The factory-default key map of SPARSH VP248, phones have the DSS Key labeled as 'Names'. SPARSH
VP310 have a fixed feature key ‘Contacts'
2. Global Directory: The names of the external parties must be configured against their respective numbers
in the directory. Refer the topic “Abbreviated Dialing” for instructions on configuring the Global Directories.
3. Personal Directory: The names of the external parties must be configured against their respective
numbers in the Personal Directory. Refer the topic “Abbreviated Dialing” for instructions on configuring the
Personal Directories.
4. Extension Names: Extensions must be SIP phones. Refer the topics related to the configuration of the
extensions
110
.
5. Class of Service: Dial By Name is allowed to all SIP Extension users. However, the use of this feature is
related to the following features, which must be enabled in the Class of Service of extension users:
• Internal Calls - This is a part of the Basic Features. By default these are enabled.
• Global Directory Part 1
• Global Directory Part 2
• Global Directory Part 3.
Global Directory Part 1 is assigned to the default CoS group 01 assigned to all extensions in the default
Station Basic Feature Template 01.
If you want the names to be drawn from Global Directory Part 2 and Part 3, provided these are
programmed, you must enable these two directories in the CoS of the SIP extensions.
Refer “Abbreviated Dialing”, for instructions on configuring the Global Directory.
Refer “Class of Service (COS)” and “Station Basic Feature Template” for configuration instructions on how
to enable a feature in the CoS and how to apply it on extensions.
The system will display the names exactly as they have been configured in the Personal and Global
Directories.
110. You may also refer the instructions provided under the topic Configuring Extensions: “Configuring Matrix SPARSH VP330”, “Con-
figuring Matrix SPARSH VP248”, “Configuring Matrix SPARSH VP310”, “Configuring Matrix SPARSH VP510”, “Configuring Matrix
Extended SPARSH VP710”.