796 Matrix PRASAR UCS System Manual
How to use
For Extended IP Phone Users
• Press 'Names' key.
• You get the prompt: 'Name'.
• Enter the initial letters for the contact's name.
• The number of matching entries that will appear at a time on your phone's display will vary according to
your phone's LCD display capacity.
• Scroll with the Up/Down navigation keys to reach the desired contact's name on the list.
• Press 'Enter' key to select the name.
• The system displays the name and number being dialed out.
• You get Ring Back Tone or Busy Tone.
Entered the wrong alphabet?
• Go ON-Hook.
• Go OFF-Hook.
• Press the DSS Key labeled 'Names' again.
• Enter the name/initial letters of the contact's name.
To Next Page
Loading...