EasyManua.ls Logo

Matrix PRASAR UCS - Page 817

Matrix PRASAR UCS
1368 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
808 Matrix PRASAR UCS System Manual
Routing Group
SIP Trunk
Flexible Number
Virtual Extension
Voice Mail Auto Attendant
For example, to place incoming calls on the extensions, select Flexible Number as the Port Type.
Port Number: For the Port Type you have selected, enter the Port Number/Group Number. The
Port Number range depends on the Port Type you have selected.
Start DDI Flexible Number: If you have selected the Port Type as Flexible Number, enter the first
extension number to which you want to assign the first DDI Number. As per the Total DDI numbers
configured, the system automatically maps the DDI numbers with the extension numbers. Both the
DDI numbers and the extensions numbers are mapped sequentially. For example, if the Start DDI
number is 2630555, the Total DDI Numbers are 10 and Start DDI Flexible Number 2001, the system
maps the DDI numbers with the extensions numbers as follows:
Hence the call for the respective DDI Number is placed on the respective extension number.
Voice Mail Auto Attendant (VMAA) Menu: If you have selected the Voice Mail Auto Attendant as
the Port Type, select the VMAA Menu to be assigned to the respective DDI Routing Table entry.
You may click the Voice Mail Auto Attendant (VMAA) Menu link to edit the parameters of desired
VMAA Menu. For details, see “Voice Mail Auto-Attendant Menu”.
Click Submit.
If you want to apply Reverse DDI, that is, if you want DDI numbers to be displayed as the CLI to the called party,
you must configure the Outgoing Reference Table. The system uses the same DDI Routing Table to trace the
extension users and their respective DDI numbers when an outgoing call is made.
To assign the Outgoing Reference ID and to configure the Outgoing Reference Table you must,
Determine the SIP Trunk on which you want to apply the Reverse DDI logic.
On the SIP Trunk, assign an Outgoing Reference ID number. To do this,
Login as System Engineer.
Under Configuration, click SIP Trunk Parameters.
DDI Number Start Flexible Number
555 2001
556
.
.
.
.
.
564
2002
.
.
.
.
.
2010

Table of Contents

Other manuals for Matrix PRASAR UCS