76 Matrix PRASAR UCS System Manual
Installing DSS532 with SPARSH VP510
Once you have installed SPARSH VP510 with PRASAR UCS, you can install the DSS532 by following the steps
given below:
1. Unpack the box and verify the package contents
12
.
2. Four clamps are provided with the phone — 2 DSS-Phone Clamps and 2 DSS-DSS Clamp.
Connecting the First DSS532
Connecting the Extender
3. Turn the phone upside down on the table and place the inverted DSS532 adjacent to it.
4. To attach the DSS532 with the phone, place the DSS Extender as illustrated below.
12. See “Packing List” of Appendix topic.
To Next Page
Loading...