Matrix PRASAR UCS - Page 906

Matrix PRASAR UCS System Manual 897
Assigning Access Codes to a Range of Extensions
You can assign Access Codes to a range of Extensions
If you are assigning a range of Extension Numbers (Access Codes) to the desired ports, and a match is found for
the same extension numbers, the system will clear these extension numbers from the existing database. The new
extension numbers will be assigned according to the given range.
Assigning Extension Numbers through Extn. Numbers Range has a priority over Extension Numbers assigned on
individual ports.
To assign a range of Extension Numbers,
• Login as System Engineer.
• Under Configuration, click Access Codes.
• Click Extn. Numbers in Range.
• Against each Index configure the following:
• Extension Type: Select the Extension Type. You can select SIP Extension, Department Group or
Virtual Extension.
• Start S/W Port Number: Enter the Software Port Number from which you want the system to start
assigning the desired extension numbers.
• Define the range of Station Access Codes (Extension Number/Flexible Number/Access Code) that you
wish to assign to the Extension Type you selected in Start Extension Number and End Extension
Number.