Matrix PRASAR UCS System Manual 919
• Click Hotline to expand.
• Select the type of Hotline you want to set for the extension user from the following:
• To set Hotline for an Extension or Department Group, select Hotline to Station or Department Group.
Enter the Extension number or the Department Group Number in the corresponding box. Default:
Blank.
• To set Hotline for a group of trunks, select Hot Outward Dialing to Group of Trunks using TAC and
select the Trunk Access Code from the corresponding drop down list.
Each Trunk Access Code has a group of trunks for which Hotline will be set.
• To set Hotline for an external number, select Hot Outward Dialing to External Number. Enter the
external number in the corresponding box and in Using TAC select a TAC from the drop down list.
Using a free trunk from this TAC the external number will be dialed out by the system.
• Click the Set Hotline button to set Hotline.
The message “Hotline is set” appears.
• To set Delayed Hotline, in Hotline Timer enter the desired time in seconds.
On the expiry of this timer, it connects the extension user to the desired hotline extension number,
department group, external number or outgoing trunk.
• Click the Set button to set Delayed Hotline.
• To cancel Hotline, click the Cancel Hotline button.
When you set the Hotline Timer to ‘00’ seconds (for immediate Hotline), you will not be able to dial any
digits, not even the feature code to Cancel Hotline.
To Next Page
Loading...