84 Matrix PRASAR UCS System Manual
6. Connect the optional USB Flash drive.
7. Connect the network and power.
There are two options to connect the power and the network.
• AC power
• Power over Ethernet (PoE)
AC Power
To connect the AC power:
• Connect the DC plug on the power adapter to the DC5V port on the phone and connect the other end
of the power adapter into an electrical power outlet.
Power over Ethernet (PoE)
With the included or a regular Ethernet cable, the IP Phone can be powered from a PoE-compliant switch
or hub.
To Next Page
Loading...