Matrix PRASAR UCS - Page 967

958 Matrix PRASAR UCS System Manual
• Under Configuration, click Macros.
The Macros page opens. Each macro is stored against an index number. By default, the Macros Number
String and Access Code are blank.
• In the Number String field, enter the strings the system should consider as command when the DSS Key
on the Extended IP Phone is pressed.
• Click Submit.
When PRASAR UCS is operated in the Hotel Mode (see Customer Profile under “System Parameters”),
Number Strings and Access Codes can be assigned for features such as Front Desk, Room Service, Voice
Guided Alarm, Reservation Desk, Voice Mail System, Retrieve Message. These Macros have to be
configured in this page. To know more, see the topic Customer Profile in the PRASAR UCS Hospitality
System Manual.
Now, assign this Macro to a DSS Key on the Extended IP Phone.
• When you assign a Macro to a DSS Key on the Extended IP Phone,
• You must select Macro as Function Type
•As Offset, you must select the Macro Index number (1-50) at which the number string is stored. In
this example, it would be Macro Index 1.
For instructions on assigning a macro to a DSS key of the Extended IP Phone, see “DSS Key Settings”
in “Configuring Matrix SPARSH VP330”, “DSS Key Settings” in “Configuring Matrix SPARSH VP248”,
“DSS Key Settings” in “Configuring Matrix SPARSH VP310” and “DSS Key Settings” in “Configuring
Matrix SPARSH VP510” for instructions.