988 Matrix PRASAR UCS System Manual
Configuring OGTB Groups using Jeeves
• Login as System Engineer.
• Under Configuration, click OG Trunk Bundle Groups.
Choose the OG Trunk Bundle Group number (01-08) you want to use. In each group you can configure
maximum 8 'members'.
• Now program the following parameters for the selected OG Trunk Bundle Group:
•Rotation: Select the Rotation check box to enable rotation for routing outgoing calls in the group which
has multiple 'member' trunks. When enabled, each outgoing call will be routed through the next
member to the one that routed the previous call. This ensures equal distribution in routing outgoing
calls. The check box has no relevance if the group has only one member. For detailed instructions, see
“Outgoing Trunk Bundle”
• Least Cost Routing: If required select the desired method — Time-based LCR, Number based LCR,
Time and Number based LCR or Service Provider-based LCR — as per your requirement. For details,
see “Configuring LCR”.
A
System finds the cheapest
trunk from the group
depending upon the time as
well as the tariffs offered
according to the area/
distance/phone number dialed
System waits for dialing
of the entire number and
stores the number at a
memory location
C
B
System ignores the area code,
checks the number in Service-
provider based LCR Table and
routes the call according to
the trunk assigned for the
respective number
System waits for dialing
of the entire number and
stores the number
C
To Next Page
Loading...