Matrix PRASAR UCS System Manual 989
• OG Trunk Bundle Member1 to 8: Select the desired OG Trunk Bundle numbers you have already
created. If you have not created the OG Trunk Bundles, for instructions see “Outgoing Trunk Bundle”.
Configure only as many OG Trunk Bundles as members in the group as you want and set the
remaining Members as '000'.
• Click Submit.
• Repeat the same steps to create another OG Trunk Bundle Group.
How to use
• To grab OG Trunk Bundle Group 3, the user should dial ‘61’.
• To grab OG Trunk Bundle Group 1, the user should dial ‘0’.
How the Rotation check box work?
• Eight OG Trunk Bundles can be configured as members of each OGTBG.
• OGTBG has “Rotation” check box, and each OG trunk bundle has Rotation type “Cyclic/Descending/
Ascending”.
• These two check boxes don’t have any relation with each other, and so, will work in isolation.
If Rotation is ON in the OGTBG:
• The first call will get routed using the “OG Trunk bundle Member1”. The trunk port from the OG Trunk
Bundle member 1 will get selected using the rotation type selected for the OG trunk bundle programmed
as member 1.
• When there is a second call, it will get routed using the “OG trunk bundle Member 2”, and the trunk port
from the OG trunk bundle member 2 will get selected according to the rotation type programmed in the OG
Trunk Bundle programmed as member2.
• Accordingly, the member of the OGTBG will be accessible to the station user accessing the OGTBG in
sequence.
If the Rotation is OFF in the OGTBG:
• The calls will always get routed from the “OG trunk Bundle member 1” if any trunk in it is free. If all the
trunks of the “OG trunk bundle member 1” are busy, then the call will get routed using the “OG trunk
bundle member 2”.
• Now the trunk to route the call will get selected as per the rotation type configured for the OG trunk bundle
used as member 2. When the trunk ports of OG trunk bundle configured in member 1 and member 2 all
are busy, the OG trunk bundle member 3 will be used to route the call.
1 Lift the handset. Dial tone
2Dial 0/5/61 to 64. Dial tone of the trunk.
3 Dial desired external number.
To Next Page
Loading...