4D-10 - INSTRUMENTATION 90-823225--1 1096
Lanyard Stop Switches
NOTICE
For repair procedures on MPI / EFI Engines,
refer to Section 5C.
TESTING
74061
b
a
Remote Control Mounted Style Switch - Electron-
ic Fuel Injection (EFI) Engines
a - Switch Lanyard
b - Leads (BLK/YEL)
1. Disconnect switch leads.
2. Test switch as follows.
a. Connect an ohmmeter to leads.
b. There should be no continuity with switch lan-
yard connected and continuity with switch
lanyard disconnected.
b
a
74062
Remote Control Mounted Style Switch - Carbu-
reted Engines
a - Switch Leads
b - Leads (PUR)
1. Disconnect switch leads.
2. Test switch as follows.
a. Connect an ohmmeter to leads.
b. There should be continuity with switch lan-
yard connected and no continuity with switch
lanyard disconnected.
72762
b
a
Toggle Style Switch
a - Switch Cap
b - Switch
To Next Page
Loading...
