90-823225--1 1096 WEBER 4 BARREL CARBURETOR - 5D-11
IMPORTANT: Do not put pressure on fuel needle
valve and seat while bending tab, or damage may
result.
70470
b
a
a - Float
b - Tab (Bend)
Float Level
1. Measure float level from bottom side of carbure-
tor top (with gasket in place) to toe of float as
shown. It must be set at 1-9/32 in. (33 mm).
70468
a
b
a - Float Level Measurement
b - Gasket
2. If float level requires adjustment, hold hinge pin
firmly and bend float arm shown, as needed.
IMPORTANT: Do not put pressure on fuel needle
valve and seat while bending tab, or damage may
result.
70468
a
a - Float Level Tab (Bend)
To Next Page
Loading...
