5C-22 - ROCHESTER 4 BARREL CARBURETOR 90-823225--1 1096
b. Insert choke shaft on vacuum break control
assembly to engage flat sided hole of choke
lever, and secure with screw. Tighten se-
curely.
72127
a - Choke Rod
b - Choke Shaft
c - Vacuum Break Control Assembly
b
c
a
3. Install pump discharge check ball, retainer and
primary main metering jets. Tighten securely.
72128
a - Check Ball (Not Shown)
b - Retainer
c - Primary Main Metering Jets
b
c
a
IMPORTANT: Float needle and seat should be re-
placed as a set only.
4. Install float needle seat and gasket.
72116
a - Float Needle Seat
b - Gasket
b
a
5. Install float needle and float assembly.
a. Install pull clip onto needle.
72129
a - Pull Clip
b - Needle
b
a
To Next Page
Loading...
