90-823225--1 1096 WEBER 4 BARREL CARBURETOR - 5D-37
30. Reconnect accelerator pump linkage rod to hole
in accelerator pump lever where originally con-
nected or refer to “Important Service Information”
in this section for information regarding adjust-
ment. Accelerator pump linkage adjustment
should be checked at this time; refer to Adjust-
ments - “Accelerator Pump” as previously out-
lined. Secure using wire clip.
70390
b
a
a - Accelerator Pump Linkage Rod
b - Wire Clip
31. Refer to “Installation” and install carburetor.
To Next Page
Loading...
