90-823225--1 10965E-168 - ELECTRONIC FUEL INJECTION (MULTI-PORT AND THROTTLE BODY)
INSTALLATION
1. Mount new ECM to electrical bracket.
2. Connect J1 and J2 electrical connectors to the
ECM.
72801
b
a
c
d
All Engines Except Black Scorpion
a - Electrical Bracket
b - ECM
c - J1- Electrical Connector (Front Connector)
d - J2- Electrical Connector (Rear Connector)
Knock Sensor (KS) Module
NOTICE
Refer to “Service Precautions,” in “Repair
Procedures,” BEFORE proceeding.
REMOVAL
1. Remove Knock Sensor from electrical bracket.
72801
b
a
All Engines Except Black Scorpion
a - Electrical Bracket
b - Knock Sensor (KS) Sensor
2. Disconnect electrical connector at Knock Sensor
(KS) module.
CLEANING AND INSPECTION
1. Clean the external surfaces of the KS module
with a dry cloth.
2. Inspect surfaces of KS module for evidence of
damage.
To Next Page
Loading...
