6B-10 - CLOSED COOLING MODELS 90-823225--1 1096
2. Press hub off shaft with Universal Puller Plate
and an arbor press.
72648
a
a - Universal Puller Plate (91-37241)
3. Puncture front oil seal with a tool and pry from
bearing housing.
72649
4. Remove snap ring from bearing housing bore
and press shaft and bearings out pulley end of
housing. Bearings have a slip fit in housing; do
not use excessive force.
72657
a
72658
a
a - Snap Ring
To Next Page
Loading...
