CLOSED COOLING MODELS - 6B-2590-823225--1 1096
5. Position gasket on thermostat housing and
reinstall thermostat cover. Install lifting eye (not
shown following) if so equipped. Torque bolts to
30 lb. ft. (41 N·m).
73111
b
c
f
a
g
e
d
Models Without Sleeve
a - Bolts
b - Lockwashers
c - Cover
d - Gasket
e - Thermostat (Typical)
f - Housing
g - Gasket With Continuity Rivets
73110
b
c
d
e
f
g
h
a
i
Models With Sleeve
a - Bolts
b - Lockwashers
c - Cover
d - Gasket
e - Thermostat
f - Cork Gasket (DO NOT Use Perfect Seal)
g - Sleeve (Turned in Lip Toward Thermostat)
h - Housing
i - Gasket With Continuity Rivets
To Next Page
Loading...
