HURTH DOWN ANGLE TRANSMISSION - 8C-1390-823225--1 1096
2. Remove cover and filter element from transmis-
sion.
27662
3. Remove filter element from cover and inspect
O-rings for wear. Replace if necessary.
50975
a
a - O-Rings
4. Push hose of suction pump through suction pipe
and down to the bottom of the housing. Pump
fluid from housing.
71043
5. Remove dipstick by turning (counterclockwise)
and pulling at the same time.
27661
6. Inspect seal for wear and replace if necessary.
27659
a
a - Seal
To Next Page
Loading...
