8C-16 - HURTH DOWN ANGLE TRANSMISSION 90-823225--1 1096
!
CAUTION
Be careful not to allow dirt to enter control block
from front side.
3. Cover openings in control block with a protective
cloth.
27665
a
a - Openings
HOUSING
1. Remove hex head bolts from input side of hous-
ing.
71044
a
a - Bolts (12)
2. Remove input side of housing. Be sure to locate
and save locator pins.
71053
a
a
a - Locator Pins
3. Remove input shaft assembly.
71054
To Next Page
Loading...
