8C-40 - HURTH DOWN ANGLE TRANSMISSION 90-823225--1 1096
b. Pull bearing cup from housing as shown.
27681
4. Add the necessary amount of shims as deter-
mined previously to the appropriate bearing
bores.
27682
!
WARNING
Use care in handling housing once it has been
heated. Severe burns could result. Use special
protective gloves to handle housing.
5. Heat each tapered roller bearing cup bore with a
torch lamp. Install bearing cups into appropriate
bore and tap into place using a suitable mandrel.
When housing has cooled (DO NOT cool with
water), tap bearing cups to ensure they are fully
seated.
71063
a
27681
b
a - Torch Lamp
b - Bearing Cups
To Next Page
Loading...
