Mercury 305 CID - Page 957

POWER STEERING - 9A-990-823225--1 1096
2. Loosen hose clamp and remove hose from back
of pump.
72848
b
a
a - Hose Clamp
b - Hose
INSTALLATION
1. Using hose clamp, install new hose on back of
pump. Tighten clamp securely.
72848
b
a
a - Hose Clamp
b - Hose
2. Using hose clamp, install hose on fluid cooler.
Tighten clamp securely.
72588
a
b
c
Port Side Mounted Fluid Cooler
a - Fluid Cooler
b - Hose Clamp
c - Hose
74752
a
b
Rear Mounted Fluid Cooler
a - Fluid Cooler
b - Hose
3. Fill and air bleed system. Refer to Section 1B -
“Maintenance” (see “Table of Contents”).