2. Click the “+” symbol under the last pad grid on the right to create another Pattern bank.
→ A new empty Pattern bank is created and its pad grid appears in place of the “+” symbol.
If the last Pattern bank is empty, there is no “+” symbol under its pad grid and you cannot create
any new Pattern bank.
Deleting a Pattern Bank
To delete a Pattern bank:
1. Open the Pattern Manager (see ↑11.7.1, The Pattern Manager and Pattern Mode).
2. Hover the pad grid of the desired Pattern bank with your mouse.
A little cross appears at the top right of the pad grid.
3. Click the little cross to delete that Pattern bank.
→ The Pattern bank is deleted including all its Patterns, if any. The following banks are
shifted up to fill the gap.
Working with Patterns
Managing Patterns
MASCHINE MIKRO - Manual - 523
To Next Page
Loading...
Need help?
General
Weight and Dimensions
