Parameters for the Stretch function.
Following parameters are available:
Parameter Description
STRETCH section
TUNE Adjusts the detuning (pitch shifting) to be applied (in semitones and
cents). Leave this value to 0.00 to leave the original pitch untouched.
FORMANT C
(Formant Correction)
Enables/disables the formant correction. Formant correction allows the
pitch-shifted audio to retain the timbre (or “color”) of the original
audio as much as possible. This is especially useful for melodic
instruments.
MODE Selects from the two available time shifting modes.
BEAT: In Beat mode, the new tempo is defined relative to the time
signature (the beats and bars) of the original audio. This can be useful
if you sampled a loop with a clearly defined rhythm (e.g., a drum
loop).
FREE: In Free mode, the new tempo is defined independently from the
time signature of the source. This is more suited for non-rhythmic
Samples. In this mode only one parameter is available: SPEED (see
below).
AUTO DTCT
(Auto Detection,
Beat mode only)
If AUTO DTCT (Auto Detection) is enabled, MASCHINE automatically
detects the tempo of the original audio.
Sampling and Sample Mapping
Editing a Sample
MASCHINE MIKRO - Manual - 847
To Next Page
Loading...
Need help?
General
Weight and Dimensions
