Depending on what is shown on the display, some of the buttons might be inactive — in that
case they are off. The active buttons (i.e. those that would do something if you would press
them) are always dimmed or fully lit.
To see and edit any parameter of any Channel properties or Plug-in in any Sound, Group, or
the Master, do the following:
1. Set the focus on the Sound, Group or the Master containing the desired Channel proper-
ties or Plug-in (see section ↑3.3.4, Focusing on a Group or a Sound).
2. Press F1 (MASTER), F2 (GROUP) or F3 (SOUND) to display the Plug-ins and Channel
properties of the Master, the focused Group or the focused Sound, respectively.
3. Press NAV + F2 (CHNL.) to navigate Channel properties or NAV + F3 (PLUG-IN) to navi-
gate Plug-ins.
Basic Concepts
Common Operations
MASCHINE MIKRO - Manual - 88
To Next Page
Loading...
