458
(10) Power
Display/set setting information related to power.
Property Description
Default
setting
Power Restore Policy
Specify the DC power action when AC powered
on.
⁃ DC stays off when AC is applied
Maintain DC powered-off after AC power
supplied.
⁃ Restore DC to previous state prior to AC loss
Restore DC-power to the previous DC Power
status before AC lost.
⁃ Always DC on when AC is applied
DC power will be always powered on after AC
power supplied.
DC stays off
when AC is
applied
Power On Delay Time
⁃ Delay Time
A user can designate the delay time for DC
power will be supplied after AC powered on by
second unit. (Settable value: 20-255)
20 seconds
Power Cycle Interval
Specify the interval time between DC power on
and DC power off.
⁃ Interval Time
A user can designate the power cycle interval
time by second unit. (Settable value: 0-255)
0 second
CPU Throttle Mode
Specify P-State for power saving.
⁃ P-S
tate
14
A user can designate P-state value of processor
for the power saving. (Settable value: 0-7)
P-state Clock Power
Consumption
(Voltage)
P0 High High
：
P7 Low Low
0
CPU Throttle Mode Current Current P-state is displayed. -
14
An user can suppress the server consumption by lowering P-state. It has the eight level, and the lower level is, the
higher server consumption will be.
To Next Page
Loading...
