NEC Xen Topaz - Page 105

Program 12 to 15
Xen Topaz Programming Manual 98
PROGRAM 15: EXTENSION BASIC SETUP
15-07: P
ROGRAMMABLE FUNCTION KEYS
Function Number List (Cont)
2. Appearance Function Level (*00-*99)
Conditions
When a key is programmed using service code 852, that key cannot be programmed with a function using
the 851 code until the key is undefined (000).
Feature Cross Reference
Refer to chart above
IN
SA
SB COPY
Function
Number
Function Additional Data LED Indication
71
Change Attendant Mes-
sage (DSPDBU)
Extension Number or
Pilot Number
(Max.4 digits)
None
72
-Not Used-
- -
73
-Not Used-
- -
74
-Not Used-
- -
75
-Not Used-
- -
76
Toll Restriction in Credit Extension Number
(Max.4 digits)
77
Voice Mail (External)
Extension Number or
Pilot.
-
78
-Not Used-
- -
79
-Not Used-
- -
80
Tandem Ring Setup Key (Max.4 digits)
Red On : Master Side
81
Automatic Transfer to
Transfer Key
Trunk Line No.1-51
Red On : Set
Function
Number
Function Additional Data LED Indication
*00 Not used
*01
Trunk Key Trunk Number 1-51
*02
Trunk Group/ Loop Key Trunk Group Number
01- 25
*03
Virtual Extension Key Extension Number. or
Department Group
Number (Max.4 digits)
*04
Park Hold Key Park Number 01-64
*05
Hybrid Operation Key
(Loop key)
0-2
0 : Incoming
1 : Outgoing
2 : Both