Program 12 to 15
Xen Topaz Programming Manual 77
PROGRAM 14: TRUNK BASIC SETUP
14-04: B
EHIND PBX SETUP
Description
Use Program 14-04 : Behind PBX Setup to indicate if the trunk is installed behind a PBX. There is one
item for each of the Night Service Modes:
Input Data
Conditions
None
Feature Cross Reference
♦ Central Office Calls, Placing
Telephone Programming Instructions
To enter data for Program 14-04(Behind PBX Setup):
1. Enter the programming mode.
2. Enter 14 04
3. Enter the number of the item you want to program.
4. Select the Trunk port number to programmed by pressing the FLASH or the VOLUME▲ or VOLUME▼
keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’ programming section
IN
SA
SB COPY
Trunk Port Number 1-51
Day/ Night Mode Type of Connection Default Related Program
1-8
0 : Stand Alone
1 : Behind PBX
0
22-02
14-04-01 Trunk1
Mode1 Connect= 0
14-04-xx Trunkxx
xxxxx
To Next Page
Loading...
