NEC Xen Topaz - Walking Toll Restriction Password Setup

Program 21 to 25
Xen Topaz Programming Manual 169
PROGRAM 21: OUTGOING CALL SETUP
21-15: I
NDIVIDUAL TRUNK GROUP ROUTING FOR EXTENSIONS
Description
Use Program 21-14 : Walking Toll Restriction Password Setup to assign the password and Toll Restric-
tion Class for Walking Toll Restriction. Each code is six digits long, using any combination of 0-9, # and *.
Input Data
Conditions
None
Feature Cross Reference
♦ Toll Restriction
Telephone Programming Instructions
To enter data for Program 21-14 (Walking Toll Restriction Password Setup):
1. Enter the programming mode.
2. Enter 21 14
3. Enter the number of the item you want to program.
4. Select the ID Table number to be programmed by pressing the FLASH or the VOLUME▲ or VOLUME▼
keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’ programming section.
IN
SA
SB
ID Table Number
1-500
Prog. No.
Item
Input Data Default
Related
Program
21-14-01
User ID
Dial (6 digits
Fixed)
No set-
ting
21-14-02
Walking Toll Restriction Class Number
1-15
15
21-14-01 TBL1
User ID
21-14-xx TBLxxxx
xxxxx