Program 26 to 35
Xen Topaz Programming Manual 230
PROGRAM 26: ARS SERVICE & LEAST COST ROUTING
26-08: LCR M
ANUAL OVERRIDE ACCESS CODE TABLE
Description
Use Program 26-08 : LCR Manual Override Access Code Table to define the access codes that the us-
ers can dial to select an indirect carrier i.e. bypass the automatic selection of Program 26-02.
Input Data
Conditions
The override code must begin with a digit 1 or it will not be checked against this table.
There can also exemptions to this table in Program 26-09.
Feature Cross Reference
♦ Least Cost Routing
Telephone Programming Instructions
To enter data for Program 26-08(LCR Manual Override Access Code Table):
1. Enter the programming mode.
2. Enter 26 08
3. Enter the number of the item you want to program.
4. Select the Manual Override Access Code Table number to be programmed by pressing the FLASH or the
VOLUME▲ or VOLUME▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’ programming section.
IN
SA
SB
Manual Override Access Code Table Number
1-10
Prog.
No.
Description Input Data
Default
Related
Program
26-08-01
Manual Override Access Code
This code is dialled by the user to
bypass the automatic selection.
Max.4 digits( 0-9,*,#) No setting 26-02
26-08-02
Carrier table No.
The carrier table number of Pro-
gram 26-05.
0-25 0 26-05
26-08-01Manual 1
Dial
26-08-xx Manualxx
xxxxx
To Next Page
Loading...
