Program 26 to 35
Xen Topaz Programming Manual 249
PROGRAM 31: EXTERNAL SPEAKER AND INTERNAL PAGING
31-08: BGM
ON EXTERNAL PAGING
Description
Use Program 31-08 : BGM on External Paging to set the Background Music option for each External
Paging zone. If enabled, the system will play Background Music over the zone when it is idle.
When programming, the zones on the PGDU Units are numbers 1-6.
Input Data
Conditions
Speakers 1 ~ 6 apply to 2PGDU card.
Speaker 7 is the in-built port on 308M
Feature Cross Reference
♦ Background Music
♦ Paging External
Telephone Programming Instructions
To enter data for Program 31-08 (BGM on External Paging):
1. Enter the programming mode.
2. Enter 31 08
3. Enter the number of the item you want to program.
4. Select the External Speaker number to be Programmed by pressing the FLASH or the VOLUME▲ or
VOLUME▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’ programming section.
IN
SA
SB
External Speaker Number Input Data
Description
Default
1-7
0 : Disable
(BGM Prevented)
1 : Enable
(BGM allowed)
Use this option to allow or prevent the
External Paging zone you select from
broadcasting Background Music
when it is idle.
0
31-08-01 SPK 1
BGM 0
31-08-xx SPK x
xxxxx
To Next Page
Loading...
