NEC Xen Topaz - VRS Waiting Delayed Message for IRG

Program 21 to 25
Xen Topaz Programming Manual 188
PROGRAM 22: INCOMING CALL SETUP
22-14: VRS W
AITING DELAYED MESSAGE FOR IRG
Description
Use Program 22-14 : VRS Waiting Delayed Message for IRG to define for each incoming ring group the
timers, VRS message number and tone kind for VRS Waiting Message.
Input Data
Example ） Time chart for VRS Waiting Message (PRG22-14-03 = 3 counts, PRG22-14-05=2 counts)
Conditions
None
Feature Cross Reference
♦ None
IN
SA
SB
Incoming Ring Group Number
1-25
Prog. No. Item Input Data
Default
22-14-01
1
st
Waiting Message start timing 0-64800(sec.) 0
22-14-02
1
st
Waiting Message Number 0-49 (0 : No
Message, 49 : Fixed
message)
0
22-14-03
1
st
Waiting Message sending count 0-255 0
22-14-04
2
nd
Waiting Message Number 0-49 (0 : No
Message, 49 : Fixed mes-
sage)
0
22-14-05
2
nd
Waiting Message sending count 0-255 0
22-14-06
Tone kind at Message Interval 0 : Ring Back Tone
1 : MOH Tone
2 : BGM Source
0
22-14-07
Disconnect time after the end of VRS Waiting
Message
0-64800(sec.) (0 :
Not Disconnected)
60